Blog
The correct maintenance method of motorcycle
Release time:
2024-02-29
The correct maintenance method of motorcycle is as follows:
Clean. Regular cleaning of motorcycles is the basis for keeping them in good condition. Pay attention to the use of special cleaning agents and avoid the use of corrosive chemicals. After cleaning, wipe the water with a clean cloth to prevent rust.
Check the oil level. The oil level of the engine oil and gear oil should be checked before each ride. The oil and gear oil are very important for the normal operation of the motorcycle. Too low oil level may cause the engine to overheat or increase gear wear.
Check the tires. The tire is the part of the motorcycle that is in direct contact with the road. Its safety is very important. The tire wear should be checked regularly to ensure that the tire is not cracked or excessively worn. At the same time, keep the tire pressure within the specified range.
Check the brakes. The reliability of the brake system is directly related to riding safety. The wear of the brake pads should be checked regularly and the severely worn brake pads should be replaced in time.
Examine the light and the signal unit. Ensuring that all lights and signal devices are working properly, including turn signals, brake lights, headlights, etc., not only helps ensure the safety of night riding, but also improves the visibility of the motorcycle and reduces the risk of accidents.
In addition, motorcycle maintenance also includes checking the tightness of the chain, checking and replacing spark plugs, checking the battery, checking and replacing the coolant, etc.
Previous Page
Next Page
Previous Page
Next Page
Blog
2024-02-29
2024-02-29
2024-02-29
2024-02-29
2024-02-29
Specializing in the production of motorcycle aluminum tail box, motorcycle top box, motorcycle side box, motorcycle bag, motorcycle cushion and other products
Address: No. 58, Electromechanical Avenue, Shuangqiao Economic and Technological Development Zone, Dazu District, Chongqing, China
